Sensor

Sensor
Hit Points	15
Armor	-
Luminosity	no
Data Value (ID)	980

Sensors are logic blocks which, when activated by a logic signal, output a high (on) signal if the conditions they are measuring have been met. They can measure the status of a variety of systems, such as power, shields, and cargo. The value at which they return a high signal is set by linking Activation Modules to them, and activating a number of them. The sensor will then activate when its measured value has the same ratio of current:maximum as the Activation Modules have on:total.

Item Description

The sensor blocks is used to check the condition of a linked system.
It requires a touching activation block which will be used as output.
It also requires a block linked to the sensor to trigger a check. A clock that periodically sends a signal to the sensor is recommended.

Link the sensor to any of these blocks:

- Power Reactors
- Shields
- Doors / Force Fields
- Radar Jammers
- Cloakers
- Jump Drives
- Storage Modules
- Display Modules ( for more advanced logic )
- Thruster Modules

The sensor has a default state of 0%. Meaning that it will trigger for blocks in an "off" state or for systems that are depleted such as 0 power or 0 volume used.
You can link the sensor to a number of activation modules to set any % other than 0. It works like a rail speed controller using ratios. 3 true linked activation modules out of 6 will set it to 50%.

Production

Production Info
Produced in a			Standard Factory
Requires			To create
Alloyed Metal Mesh	x2		Sensor	x1
Crystal Composite	x2

Usage

TBA