Damage Beam Module
|Damage Beam Module|
|Reactor Hit Points||0|
|Data Value (ID)||415|
Damage Beam Modules are the output modules for Damage Beam systems. Connecting at least one to its associated computer will activate the system. Place them alone to create a new firing array or with an existing group to enhance its power.
The Damage Beam Module, when used in conjunction with a Damage Beam Computer, can create a basic but effective weapons system. The Damage Beam fires an energy beam in a straight line. Damage Beams do benefit from being grouped together (being adjacent to one another), increasing their damage. You can also choose which block outputs the beam by finding the Damage Beam Module you want to output the beam, and pressing R on it.
|Produced in a||Standard Factory|
|Damage Beam Module||
|Damage Beam Computer|
|Select computer with|
and connect with
This is a module type block and is designed to be connected to its associated computer. Modules are often used to create new arrays or enhance existing arrays by adding to the raw block count of the group. To connect simply place the block down on any entity and select its computer withand press on it. This will immediately activate the module allowing the desired system to utilize it or gain from its addition. The orientation of module block does not effect the firing direction of the system. The firing direction of a system is determined by the orientation of its main computer.
Players should take into account that every module that is added to a system also increases the energy usage of that system. Both combat and support systems give a unique power multiplier penalty for each new non contiguous array. While Effects only increase their power requirements with each block connected.